BGZHF - PMC-724 PART D

  • MSDS: BGZHF
  • Manufacturer: SMOOTH ON INC
  • Product Name: PMC-724 PART D
  • National Stock Number: 6850-00F009060
Product Identification

Product ID:PMC-724 PART D
MSDS Date:01/01/1987
FSC:6850
NIIN:00F009060
MSDS Number: BGZHF

Responsible Party
SMOOTH-ON, INC.
1000 VALLEY ROAD
GILLETTE, NJ 07933

Emergency Phone: (201) 647-5800

Info Phone: (201) 647-5800

Cage: FO384

Contractor
SMOOTH-ON, INC.
GILLETTE, NJ 07933 US

Telephone: (201) 647-5800

Cage: FO384

Ingredients

NON-HAZARDOUS FOR INGREDIENTS

Hazards

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: MAY CAUSE IRRITATION.
INHALATION: NOT LIKELY UNLESS HEATED.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN/EYES: MAY CAUSE IRRITATION. INHALATION:
NOT LIKELY UNLESS HEATED.

First Aid

First Aid:EYES: FLUSH W/WATER FOR 15 MINUTES, SEEK MEDICAL ATTENTION.
SKIN: REMOVE W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.

Fire Fighting

Flash Point Method:COC
Flash Point:380F
Extinguishing Media:FOAM, DRY CHEMICAL, CO2, WATER SPRAY
Fire Fighting Procedures:FIRE FIGHTERS SHOULD WEAR SELF-CONTAINED
APPARATUS.
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:DIKE & CONTAIN, ABSORB/SCRAPE UP EXCESS, WASH
AREA W/WARM SOAP & WATER.

Handling

Handling and Storage Precautions:USE GOOD GENERAL HOUSEKEEPING
PROCEDURES. RESEAL PARTIAL CONTAINERS. WASH THOROUGHLY AFTER USE.

Exposure Controls

Ventilation:PROVIDE ADEQUATE MECHANICAL VENTILATION.
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:CLEAN LONG LEG/SLEEVE CLOTHING.
Work Hygienic Practices:USE GOOD GENERAL HUOSEKEEPING PROCEDURES.
RESEAL PARTIAL CONTAINERS. WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:240C
Spec Gravity:1.05
Solubility in Water:MODERATE
Appearance and Odor:CLEAR YELLOW LIQUID, AMINE ODOR
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
MOISTURE CONTAMINATION TO PROTECT PRODUCT QUALITY.
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.